For some obscure, reason the Openbox V8s dislikes USB inserted channel records. The list might work on some but it may not be the case with others and sometimes even tend to brick the boxes. Well, the simple solution to the problem “Openbox V8S Scrambles” is mentioned below.
Contents
Openbox V8S Unscramble: Steps
Contents
- First, remove the channel list and further delete all the channels.
- Perform a full scan of the required satellite.
- After the successful scan, go to Edit and manually save the preferred channels into favorites.
- Make sure not to reload the channel list. It is advisable to use your personal favorites.
If you wish to install the channel list via USB, you are expected to perform the following steps.
- First, remove the channel list and further delete all the channels.
- Perform a full scan of the required satellite.
- Now dump the channel list to USB.
- Now again delete the channel list.
- This time install the channel list via USB.
If you are successfully able to install through the above procedure than it is the complied channel list, which is the root cause of the problem. On the contrary, if the problem persists, try checking your USB port.
If the above steps did not work for you, you must not worry. We got this for you. Try following this another procedure.
Alternative Method To Unscramble Openbox V8S
- You must perform a factory reset in this case.
- Proceed to channels and navigate to Edit and select delete all channels.
- Navigate to network upgrade and click on open. Further, choose to connect to the server.
- Now install the latest firmware upgrade for v8s, which is probably second on the list.
- Restart the system.
- Download the latest CWaites channel list.
- Make sure you have formatted your USB to fat32
- Install the .dbs file to your USB and connect it to the device.
- Now, navigate to tools choose to upgrade by USB, and change image to misc and install.
- Once the installation is completed, exit and restart the device.
We decided not to limit ourselves by providing information only on how to unscramble channels on openbox v8s but we also decide to share our expertise on the topic ‘How to insert the link’ in openbox v8s.
How To Insert Link In Openbox V8S?
- First, navigate to network local setting on your v8s.
- Now proceed to Camds setup and further CCcam client setup.
- Choose Manage Config Files and select 1.CCcam.cfg
- Here manually enter your line details(do not forget to follow the instructions)
- To save your settings, press the yellow button. The box will automatically restart.
Please Note- If your line has numbers 1-14 after it, perform the following steps:
- First, navigate to network local setting on your v8s.
- Now proceed to Camds setup and further choose MGCamd plug setup.
- Choose Manage Config Files and select 3.Newcamd.list
- Here manually enter your line details(do not forget to follow the instructions)
- To save your settings, press the yellow button. The box will automatically restart.
It is believed that we are successfully able to solve the most common problem in the simplest way. On off the chance, if you face any difficulties regarding openbox v8s HD channels scrambled, you may post your queries in the comment section below. We are always looking for your suggestions to improve ourselves on every step. Don’t forget to give your feedback in the comment section, down below.
